ImportantNote:TocomplywiththeFCCRFexposurecompliancerequirements,nochangetothe
antennaorthedeviceispermitted.Anychangetotheantennaorthedevicecouldresultinthedevice
exceedingtheRFexposurerequirementsandvoiduser’sauthoritytooperatethedevice.
Caution: Exposure to Radio Frequency Radiation. To comply with FCC/IC RF exposure compliance
requirements, a separation distance of at least 20 cm must be maintained between the antenna of
this device and all persons. This device must not be co-located or operating in conjunction with any
other antenna or transmitter.
CompliancewithICRulesand
RegulationsIC:6924A‐ZB3001
JascoProductsCompany
Model:ZB3001(45857)
CANICES‐3(B)/NMB‐3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
OPERATINGSPECIFICATIONS
Power120VAC,60Hz
Signal(Frequency)2.4GhzIEEE802.15.4
MaximumloadfortheZigBeecontrolledIn‐Wall Switch:
o 600WIncandescent
o 150WDimmableCFL/LED
o GangRatings:
Numberof
Dimmers
CFL/LEDRATING Incandescent
RATING
1SwitchinSingle
GangBox
150W 600W
2Switchesin
DoubleGangBox
125W 500W
3Switchesin
TripleGangBox
100W 400W
OperatingTemperatureRange:32‐104°F(0‐40°C)
Forindooruseonly.
ComplieswithFCCandIndustryCanadaregulations
Use14AWGorlargerwiressuitableforatleast80°C