Need help?Do you have a question about the Jasic Arc 200 and is the answer not in the manual?
General| Input Frequency | 50/60Hz |
|---|---|
| Output Current | 20-200A |
| Rated Output Current | 200A |
| Duty Cycle | 60% |
| Efficiency | 85% |
| Power Factor | 0.73 |
| Insulation Class | F |
| Protection Class | IP21S |
| Input Voltage | 220V |
| Duty Cycle @ 40°C | 60% |
General safety norms for arc welding and plasma cutting machines.
Precautions for ventilation, fume extraction, and respiratory protection.
Protection against arc rays, sparks, and hot materials.
Avoiding fires from sparks, hot materials, and flammable substances.
Covers RF/LF declarations, material disposal, and gas cylinder handling.
Key features like hot start, VRD, anti-sticking, and arc force.
Advanced IGBT inverter technology, high frequency, and noise reduction.
Description of controls visible on the front panel of the machine.
Description of controls and features on the rear panel of the machine.
Instructions for checking packaging, handling, and choosing a safe location.
Procedures for input/output connections and electrode polarity.
Instructions for using the machine in MMA welding mode.
Information on tungsten size, gas nozzle diameter, and setup.
Instructions for using the machine in TIG welding mode.
Common malfunctions and their causes and solutions.
To Next Page
