Need help?Do you have a question about the Jasic TIG 200 AC/DC Digital Series and is the answer not in the manual?
General| Frequency | 50/60 Hz |
|---|---|
| Protection Class | IP21S |
| Welding Process | TIG, MMA |
| Rated Output at 40°C (TIG DC) | 200A |
| Rated Output at 40°C (TIG AC) | 200A |
| Up Slope Time | 0-10 s |
| Hot Start | Yes |
| Cooling Method | Air-cooled |
Ensures safety during installation and operation by preventing electrical hazards.
Guidelines for ventilation and respiratory protection during welding operations.
Protective measures against intense arc rays and heat hazards.
Recommendations for wearing ear protection during welding.
Measures to prevent fires and explosions from sparks and hot materials.
Explains safety features like auto-stop for voltage fluctuation, over current, and overheating.
Detailed technical specifications for both welding machine models, presented in a comparative table.
Guidance on selecting a suitable and safe environment for machine placement.
Procedures and safety precautions for connecting the machine to the power supply.
Details on connecting electrode holder, TIG torch, and work clamp.
Step-by-step guide for setting up and performing MMA DC welding.
Instructions for connecting and setting up TIG welding operations.
Outlines daily, monthly, and yearly maintenance tasks for the welding machine.
Provides crucial safety notes and precautions before performing maintenance or troubleshooting.
Lists common MMA welding phenomena, their causes, and solutions.
Lists common TIG welding phenomena, their causes, and solutions.
Details alarm types, automatic responses, causes, and solutions for machine errors.
Lists and identifies all part numbers and descriptions for the JT-200D model.
Lists and identifies all part numbers and descriptions for the JT-315D model.
Provides a detailed table of parts for the JT-200D, including part numbers and descriptions.
Provides a detailed table of parts for the JT-315D, including part numbers and descriptions.
Visual representation of parts for the JT-315D model with corresponding numbers.
Steps to enter the machine's operation mode programming state.
How to choose the specific operation mode to be programmed.
Procedure to enter the state for editing operation mode codes.
Guide to selecting code numbers and editing their content for custom modes.
Instructions for safely exiting code editing and programming modes.
To Next Page
