Need help?Do you have a question about the Jasic TIG 315P Multi Wave and is the answer not in the manual?
General| Output Current Range (TIG) | 10-315A |
|---|---|
| Rated Output Voltage (TIG) | 22.6V |
| Power Factor | 0.93 |
| Efficiency | 85% |
| Protection Class | IP21S |
| Output Current Range (MMA) | 10-250 A |
| Features | 2T/4T |
| Input Voltage | 380V ±15% |
| Duty Cycle (TIG) | 315A at 60% |
Safety measures to prevent electric shock during operation.
Protective measures against burns and radiation from welding arcs.
Steps to prevent fires and explosions during welding.
Overview of the welder's various automatic protection functions.
Description and labeling of the front panel components.
Description and labeling of the rear panel components.
Rotary adjustment and push selector for parameter adjustments.
Explanation of how to set and adjust the arc force parameter.
How to configure hot start current and ignition time.
Procedure for setting the MMA welding current.
Options for selecting TIG welding modes (DC, AC, Mix).
How to select AC wave shapes (square, triangle, sine).
Selection of torch switch modes (2T, 4T, Cycle, Spot).
Detailed explanation of the 2-stroke torch control mode.
Detailed explanation of the 4-stroke torch control mode.
Explanation of the cycle torch control mode for repetitive welding.
Operation of the spot welding mode with defined on/off times.
Setting the duration of gas flow before welding.
Setting the initial welding current.
Time taken to ramp up to welding current.
To Next Page