Jasic TIG 315P Multi Wave - Automatic Protection Functions; Stable Performance and Consistency; Enhanced Manual Welding; High-Requirement TIG Welding

A WILKINSON STAR LIMITED PRODUCT 01-19 ISSUE 1
Automac protecon
The machine has excellent protecon funcons,
and there is a corresponding code when protecon
is enabled.
The machine integrates under-voltage and
overvoltage protecon. When the input mains
voltage is unstable and the voltage is too high or
too low, the welder protecon disables output and
prevents damage to the welder.
Overheang protecon: Due to high ambient
temperature or overloaded use, the temperature
of the internal components is too high the
protecon system prevents damage to the welder
due to high temperature.
Overcurrent protecon: When the welder exceeds
the design rated output, the welder enables
protecon to prevent damage to the welder.
Good product consistency and stable performance
This machine adopts intelligent digital control,
which is insensive to changes of component
parameters. The changes of component
parameters will not aect the performance of the
welder. It is insensive to changes in the
temperature and humidity of the environment.
Therefore, the consistency and stability of the
digital control welders are much beer than those
of the tradional welders.
Easy to use interface
Using the internaonally accepted graphical
language interface, the main human-machine
interface is simple, intuive and easy to
understand.
The operaon panel layout is convenient for
various user operaons.
High quality manual welding can be achieved
Excellent control algorithm signicantly improves
manual welding performance: Easier arc striking,
stable welding current, minimal spaer, non-sck,
good weld formaon, automac adaptaon to
changes in the length or cross-secon of the
welding cables, excellent quality in size
specicaons.
TIG welding of high requirements can be achieved
The improved digital constant current regulaon
technology ensures the low noise and high stability
of the arc in the full specicaon. In addion, the
sophiscated and mature control algorithm
provides a convenient and praccal method for the
user to freely control the current form. The
machine oers four classical TIG arc operaon
modes including 2 T, 4 T, cycle and spot welding
which provide a good way for users to realize the
special process requirements.
Remote control
Provides torch control and pedal switch opons
and users can select as needed.