Need help?Do you have a question about the Jasic JT-315PMWD and is the answer not in the manual?
General| Duty Cycle | 60% |
|---|---|
| Efficiency (%) | 85 |
| Power Factor (Cosφ) | 0.93 |
| Insulation Class | F |
| Protection Class | IP21S |
| Weight (Kg) | 25 |
| Input Voltage | 380V±15% |
| Output Current Range | 10-315A |
| Process | MMA |
| Current Range (A) | 10-315 |
Guidelines to prevent electrical hazards during welding operations.
Measures for safe operation concerning welding fumes and gases.
Protection measures against arc rays, heat, and radiation hazards.
Steps to prevent fires and explosions during welding and cutting.
Guide to setting parameters for MMA and TIG welding modes.
Configuration of AC wave types and torch switch operational modes.
Detailed explanations of 2T, 4T, Cycle, and Spot welding modes.
Settings for AC balance control and pulse frequency for optimal welding.
Instructions for performing spot welding operations.
To Next Page
