Jasic TIG 315P Multi Wave - Technical Parameters

A WILKINSON STAR LIMITED PRODUCT 01-19 ISSUE 1
10 TECHNICAL PARAMETERS
Item name Unit Parameters
Supply voltage VAC
AC400V±15%
Input frequency Hz
50
Rated input current A
19.5@TIG 21.0@MMA
Power capacity kVA
13.50@TIG 14.5@MMA
Output current adjustment range (TIG)
A
10～315
Output current adjustment range (MMA)
A
10～270
Arc force current adjustment range A
0～100
Hot start current adjustment range A
0～80
No-load voltage V
70
VRD voltage V
12.4
Rated operang voltage V
22.6@TIG 30.8@MMA
AC output frequency Hz
50～200
AC balance (Cleaning width) %
20～60
AC-DC hybrid output frequency Hz
1.0～20
AC-DC hybrid duty cycle (DC) %
5～95
Base current %
6～315
Pulse frequency
DC Hz
0.5～200
AC Hz
0.5～20
Pulse duty cycle %
5～95
Preow gas me S
0.5～10
Poslow gas me S
0.5～15
Upslope me S
0～15
Downslope me S
0～15
Hot start current me/ S
0.01～1.5
Remote control
Yes
Arc strike mode
High frequency oscillaon arc striking, contact arc
Eciency (%) %
80
Duty cycle (%) %
TIG: 315@30% - MMA: 270@30%
Power factor
0.70
Insulaon class
F
Enclosure rang
IP21S
Operang temperature
o
C
-10～40
Dimensions mm
566.0 x 223.5 x 405
Weight Kg
25.5