Jasic TIG 315P Multi Wave - IGBT Inverter Technology; Welding Performance Features

A WILKINSON STAR LIMITED PRODUCT 01-19 ISSUE 1
pulsed TIG welding, AC-DC hybrid TIG welding and
coated electrode MMA welding (DC, AC). It can be
used in a wide range of welding operaons with
various types of materials. The unique electrical
structure and air duct design inside the machine
can accelerate the dissipaon of the heat generated
by the power devices, thus increasing the
connuous load rang of the machine. Due to the
unique air duct heat dissipaon eciency, the
damage to the power devices and the control
circuit caused by the dust sucked by the fan can be
eecvely avoided, thus greatly improving the
reliability of the machine.
Excellent welding performance, rich funcon
integraon, high eciency, small size, lightweight,
and many other features make it very convenient
for both professional and non-professional welders
to put into use in both industrial applicaons and
outdoor applicaons and meet a wide range of
welding requirements.
Advanced IGBT inverter technology
The inverter frequency is 20 KHz which signicantly
reduces the loss of copper and iron, improves the
overall eciency and has a signicant energy saving
eect.
Leading control methods
Advanced control soluons have signicantly
improved the performance of the welder and have
met the welding process requirements to a greater
extent.
New secondary inverter topology patent
technology.
Using new control technology, the voltage spikes
generated by the secondary inverter are smaller,
the reliability is improved, the energy consumpon
is lower and the volume is smaller.
Controlled by world’s leading MCU intelligent digital
technology, the core funcons of the welder are
realized by soware. It is a digitally controlled
welder. Its funcon and performance are greatly
improved compared with the tradional welder.
New soware control can be upgraded according to
demand for easy maintenance.
Excellent welding performance
It can be widely used for welding all kinds of acid
and alkaline electrodes.
It has the characteriscs of easy arc striking, low
spaer, stable current and excellent weld bead
prole.
AC TIG welding can be widely used in welding with
non-ferrous metals such as various aluminum alloys
and magnesium alloys featuring a variety of
waveform opons and wider applicaon.
DC TIG welding can be applied to the welding of
various stainless steels and carbon steels.
Great shape and structure
Streamlined front and rear panel design.
High-strength engineering plascs are used on the
front and rear panels to eecvely ensure that the
machine can work eciently under harsh
condions such as high impact and dropping.
Excellent insulaon performance.
“Three proong” design, good an-stac
performance and corrosion resistance.