Need help?Do you have a question about the Jasic MIG250 and is the answer not in the manual?
General| Brand | Jasic |
|---|---|
| Model | MIG250 |
| Category | Welding System |
| Language | English |
Covers PPE, electric shock, fumes, arc rays, fire, hot material, noise hazards.
Overview and detailed functions of the HD digital screen interface.
How to switch between MIG, MMA, and Lift TIG welding modes.
How to enable/disable and use the Synergic MIG function for auto-parameter matching.
Explanation of Knob A for adjusting current, wire feed speed, and other parameters.
Explanation of Knob B for adjusting voltage, arc length, and other parameters.
How to access and modify advanced default parameters and functions.
Overview of the LCD screen and its interactive elements.
Details the options and navigation of the LCD screen's home page.
How to select and enter different welding modes via the LCD screen.
How to adjust primary welding parameters like current, speed, and voltage.
How the welder displays protection/malfunction codes and stops operation.
General instructions for operating the MIG welding function.
How to select MIG or SynMIG mode using the panel controls.
How to set welding parameters when the Synergic function is disabled.
How to set welding parameters when the Synergic function is enabled.
Step-by-step guide for starting welding in 2T and 4T modes.
General instructions for operating the MMA welding function.
How to set MMA parameters like current and arc force.
General instructions for operating the Lift TIG welding function.
General troubleshooting steps for common problems in MIG, MMA, and Lift TIG.
Explanation of error codes, their causes, and corrective actions.
To Next Page
