Need help?Do you have a question about the Jasic ARC500 and is the answer not in the manual?
General| Duty Cycle | 60% |
|---|---|
| Weight | 25 kg |
| No-Load Voltage (V) | 65V |
| Efficiency (%) | 85% |
| Power Factor | 0.93 |
| Protection Class | IP21S |
| Insulation Class | F |
| Input Voltage | 220V |
| Output Current Range | 20-500A |
| Input Power Capacity (kVA) | 24kVA |
| Output Voltage (V) | 40V |
Guidelines for safe electrical installation and handling to prevent electric shock hazards.
Recommendations for ventilation and respiratory protection during welding operations.
Protective measures against arc rays, sparks, and hot materials to prevent burns and eye damage.
Importance of wearing ear protection during welding operations due to potential noise exposure.
Warning to keep clear of moving components like fans to avoid injury.
Safety steps to prevent fires and explosions caused by sparks, hot materials, or flammable substances.
Information on potential effects of magnetic fields on medical equipment and sensitive electronics.
Overview of key operational features like hot start, anti-sticking, and self-adaptive arc force.
Details on advanced IGBT inverter technology, noise reduction, and control systems.
Details on the controls, indicators, and connectors located on the front panel of the machine.
Information on the switches, cable glands, and data plate found on the rear panel.
Instructions for checking the machine for any signs of damage upon delivery.
Guidance on selecting a suitable position and environment for machine operation.
Procedures for ensuring correct power supply and connecting the machine safely.
Details on connecting electrode holders and work clamps for various welding modes.
Specific instructions for connecting leads for MMA welding.
Specific instructions for connecting leads and gas for TIG welding.
Step-by-step guide for operating the machine in MMA welding mode.
Instructions for connecting and using wired or wireless remote control units.
Guidance on identifying and resolving common problems encountered with the welding machine.
Explanation of the meaning behind various LED indicators for fault diagnosis.
To Next Page