Why does the electrode holder become very hot on my Jasic MIG 200 Welding System?
If the electrode holder gets very hot, it's likely because its rated current is smaller than the actual working current. Replace it with one that has a higher rated current capacity.
General| Rated Input Power | 5.5 kW |
|---|---|
| Output Current Range | 30 - 200A |
| Output Current | 200 A |
| Wire Diameter | 0.6-1.0 mm |
| Weight | 12.5 kg |
| Dimensions | 485 x 185 x 370 mm |
| Protection Class | IP21S |
| Duty Cycle | 200A @ 60% |
Guidelines for safe electrical connections and operation of welding equipment.
Safety precautions for operating the welding machine and handling it.
Essential PPE for welding to protect against arc rays, heat, and sparks.
Chart for selecting appropriate lens shades for different welding processes.
Health risks associated with welding fumes and gases, and control measures.
Measures to prevent fires and explosions in the welding area.
Safe procedures for storing, using, and handling gas cylinders.
Key features and specifications of the MIG welding machine series.
Steps for connecting the machine to the power supply.
How to connect welding leads and electrode holder.
Procedure for connecting the machine for MMA welding.
Procedure for connecting the machine for MIG welding.
Explanation of the MMA welding process and settings.
Explanation of MIG/MAG welding and setup.
Common MMA welding defects and their solutions.
Guide to setting up the MIG welding machine with various materials.
Common MIG welding defects and methods to prevent or fix them.
Table listing common faults and their possible causes.
To Next Page