Jasic MIG 350 Pulse Separate - Component Identification

WWW.JASIC.CO.UK 10
No. Name Part No Funcon descripon
1
Wire feeder spool
cover
10016512 To install and protect wire feeder spool, max capacity is 20Kg.
2
Wire feeder
operaon panel
10051584
Wire feeder control panel equipped with current and voltage display
window, current adjusng knob, voltage compensaon adjusng knob and
inching wire feeding key.
There is preset current display and adjustment when under MIG/MAG, can
display and adjust oset voltage, real me Current and voltage display
during welding.
3 Torch connector 10051428 Can only connect Euro torch.
4 Control panel 10052012
Welder human-computer interacon interface, for the selecon and
adjustment of welding funcon and welding parameters.
5
Interconnecon
socket
10004702
Same funcon as the interconnecon socket on the rear panel. For the
connecon of the wire feed unit interconnecon cable.
6
Welder output
terminal +
10028782
Same funcon as the output terminal + socket on the rear panel. Connects
the welding cable of the wire feed unit interconnecon cable.
Connect with electrode holder when under MMA.
7
Water cooler water
inlet
10051974 Water lling inlet for the water cooler.
8 Water return ng 10045169 Connect with water cooled torch’s red tube when using MIG/MAG.
9 Water supply ng 10045170 Connect with water cooled torch’s blue tube when using MIG/MAG.
10
Welder output
terminal “-“
10028782 Connect with work piece.
11
Water cooler
working indicator
10006368 The indicator is on when water tank is working
12 Water cooler fuse 10006389 5A
13
Wire feeder
connecon socket
10004680 Connect with interconnecon control cable.
14 Water connecon 10045169 Connect with interconnecon red tube.
15 Water connecon 10045170 Connect with interconnecon blue tube.
16
Welding cable
connector
10040747 Connect with interconnecon welding cable.
17 Heater socket 10045461 Power supply for CO2 preheater, Output power capacity: 36V/3.5A.
18 Power switch 10004935
Welder is o when switch to “0”, welder is on when switch to “1”.
19 Fuse 10006396 5A
20 Mains input cable 10050946
Rated input voltage 3~415VAC, fuse capacity ≥40A.
21
Interconnecon
socket
10004702
Same funcon as the interconnecon socket on the front panel. For the
connecon of the wire feed unit interconnecon cable.
22
Air cooling/water
cooling changeover
switch
10048969
To select torch cooling type. When air cooling is selected the water cooler
will not work. If water cooling is selected then the water cooler will work
when under MIG/MAG modes.
23
Welder output
terminal +
10028782
Same funcon as the output terminal + socket on the front panel. Connects
the welding cable of the wire feed unit interconnecon cable.
Connect with electrode holder when under MMA.
24 Water connecon 10042646 Connect with interconnecon red tube.
25 Water connecon 10042647 Connect with interconnecon blue tube.