WWW.JASIC.CO.UK 7
Technical Data
MODEL MIG350P
Input voltage
3-phase 400V±15% (50/60Hz)
Recommended fuse capacity 32A
Rated output 350A/34V
Rated no-load voltage 70V
Rated no-load current
＜1A
Rated duty cycle (40℃)
60%
Power factor COSφ≥0.85
Eciency η≥85%
Insulaon class F
Protecon class IP21S
Welding current range 10-350A
Wire feed speed range 1.0-18.0m/min
Welding voltage range 12.0-39.0V
Torch connecon Euro type
Maximum diameter of wire spool S200/S300, 300mm
Wire diameter 0.8-1.6mm
Welding modes available
DC MIG/MAG welding
Pulse MIG/MAG welding
Double-pulse MIG/MAG welding
MMA welding
Base metal opons
Carbon steel (Steel)
Stainless steel (CrNi)
Aluminium silicon alloy(AlSi 5)
Aluminium magnesium alloy (AlMg 5)
Pure aluminium (Al99.5)
Gas opons
100% CO
2
80% Ar＋20% CO
2
90% Ar＋5% CO
2
＋5% O
2
98% Ar＋2% O
2
100% Ar
Welding wire opons
Φ0.8 (solid wire)
Φ1.0 (solid wire or ux-cored wire)
Φ1.2 (solid wire or ux-cored wire)
Φ1.6 (solid wire or ux-cored wire)
Flux cored
User interface
Graphical coordinate panel
Single-knob step less digital adjustment
Double 3-digit display
60 Channel storage
To Next Page
Loading...
