Preface
Page 6 of 80
CONVENTIONS
Acronyms
DSC – Digital Steering Controller
MCP – Mode Control Processor
SCP – Station Control Processor (individual circuit board inside MCP)
DH – Digital Helm pump
DHM – Digital Helm Manifold
RFU – Rudder Feedback Unit
RAI – Rudder Angle Indicator
ROI – Rudder Order Indicator
NFU – Non Follow Up
FFU – Full Follow Up
HPU – Hydraulic Power Unit
NOTE:
This is a note, which presents interesting and useful information.
CAUTION:
If this information is not followed, the result could cause damage to the
hardware, software or possibly injury to people.
WARNING:
IF THIS INFORMATION IS NOT HEEDED, INJURY OR DEATH OF
PEOPLE AND DESTRUCTION OF PROPERTY MAY RESULT.
Doc No.: MAN01504, 20-02-06 DSC 100 & MCP 100 Manual
To Next Page
Loading...