2. Check [Search for the best driver for your device]
then select [Next]
3. Insert the software’s CD.
4. Check [Specify a location:] ,Under that enter
D:\MX\Win9x, then select [Next].
5. Select [Next] to install 3DForce2 MX 200/400 Series
driver.
6. Select [Finish] to restart the computer.
To a new system:
1 SELECT the “Display” icon from control panel and then
tab on “Settings” screen.
1. Select Advanced at selection bar.
2. Click on Adapter tab screen.
3. Click the Change button.
4. Click the Next button at Update Device
Driver Wizard.
5. Click the Next button.
6. Select Display a list of the drivers in a
specific location... Then click the Next.
7. Insert the Software’s CD then Click the
Have Disk button.
8. Under Copy manufacturer’s file from
statement enter D:\MX\Win9x ,click the OK
button. (Where D is the letter of your CD
ROM drive, typically, D or E Drives, etc.)
9. Select ”3DForce2 MX Series, nVIDIA
GeForce2 MX 200/400”, then Click the OK
button.
10
To Next Page
Loading...