Jay Tech Cameras JTC 19C - PIN CODE, LANGUAGE & CLOCK; Change PIN Code; Language and Clock Settings

33
4. Feature
4.1 Lock
- Press OK or RIGHT navigation button to enter submenu.
- Input the password using number buttons on remote control.
- Press UP/DOWN navigation buttons to select preferred item.
NOTE: The
factory default
password is
“0000”.
4.1.1 Lock Channel
This item is used to turn on/off Lock Channel function.
4.1.2 Parental Guidance
Press OK or RIGHT navigation button to enter submenu and press UP/DOWN navigation
buttons to select preferred option.
Available options: Off, from 4 to 18.