6
C
D
PAIRING
Select “Jaybird X4” in the
list of discovered devices.
Once your X4 earbuds have
connected to your phone/
music device you will hear
the “Connected” voice
prompt. You are now ready
to listen to your music.
If the pairing is not successful, switch off your earbuds by pressing the
Middle Button until the red LED illuminates and you hear a descending
“Power off” tone. Once your earbuds have powered off repeat steps A-D.
NOTE: When you turn your X4 earbuds on for the first time or after a reset,
they will be in pairing mode.
Jaybird X4
To Next Page
Loading...
