CLASS C MOTORHOME SECTION 3 – PRE-TRAVEL INFORMATION
3-1
VEHICLE LABELS
Decals and data plates used throughout the RV aid in its safe and efficient
operation, or provide service instructions. Read all decals, data and instruction
plates before operating your RV. If any decal, data or instruction plate is painted
over, damaged or removed, it should be replaced.
LOADING YOUR RV
When loading heavy objects keep them as low as possible, preferably on the floor.
Distribute cargo side-to-side so the weight on each tire does not exceed one-half
of the GAWR for either axle. Store and secure all loose items inside the motor
home before traveling.
Overlooked items such as canned goods, small appliances on the countertop,
cooking pans on the range or free-standing furniture items can become dangerous
projectiles during a sudden stop.
EXTERIOR COMPARTMENTS
WARNING
Never load the RV in excess of the GAWR for either axle. Overloading
your RV may result in adverse handling characteristics and damage to
WARNING
For traveling safety, it is important to make sure the tie down straps are
secured on all appliances such as the toaster, coffee maker, etc. Vibration
during travel will move the appliances, creating the potential for them to fall
out of their cabinets possibly causing injury.
Store items in areas designated for storage. Do not store anything in the
areas reserved for the converter, electrical panels or the furnace or water
heater, etc.
Your recreation vehicle’s load capacity is designated by weight, not by
volume, so you cannot necessarily use all available space when loading the
vehicle. Do not exceed your GVWR and ensure you are loading the vehicle
as evenly as you can for the best possible handling. Ensure heavy items are
secured so they do not shift during travel.
To Next Page
Loading...
Need help?
General
