AUTOMATIC BREAK-AWAY
PROTECTION
The hydraulic brake system is equipped with a break-away cable or
chain.
When towing, this
cable
or
chain should be
attached
loosely
to a frame member of the tow vehicle leaving enough clearance so
that
the
trailer can
turn
freely without actuating the break-away
device.
Should the trailer separate from
the
tow vehicle, the break-away
cable
will
actuate the master cylinder, locking the brakes.
this
will
srop
the trailer in the shortest possible distance.
CAUTION:
Break-away
switch
should
be
fuliy
released
during
vehicle
operation.
CHECK
BEFORE
TOWING.
CAUTION:
Do
not
use
sway
bars
or
equalizer
bars
on
the
surge
brake system.
I
BRAKE
MMNTENACE
&
LUBRICATION
1.
For best operation of the coupling
Fill
Cap
locking mechanism is best assured
by
lubricating the ball
with
stan-
/
dard automotive chassis grease,
2.
Remove master cylinder
cap
and
make sure it is
full
of
DOT
3
automotive brake fluid.
3.
Brakes need to be checked
and
adjusted once per year. Consult
your
individual
brake owner's
manual for additional information
or consult your dealer regarding
this item.
SET-UP
OPENING
YOUR JAYCO
CAMPER
After
parking
your
new
Jayco tent camper, disconnect the coach
from
the
tow vehicle.
Have
the coach
in
a level position
and
tires
blocked so the camper will not roll anywhere.
You are now ready
to set
up
your tent which is designed to be simple and trouble free.
To Next Page
Loading...
