69
LCI OneControl® App(if so equipped)
Some models may include a Bluetooth control module that works with the LCI OneControl
App for your smartphone, tablet or other smart device. When connecting to this app, certain
systems in your RV can be controlled remotely from your smart device. This free app is
available for download for your smartphone, tablet or smart device
A Bluetooth control module is mounted in the basement area of the RV. A Password and a
Device Name are required for this Bluetooth connection. The Password and Device Name
can typically be found on a label located inside a cabinet near the entrance door of the RV.
The password and device name will also be located on a label on the control module in the
basement area although this may not be easily accessible.
The password is (6) numerical digits. To connect: enable Bluetooth on your smart device,
scan for available Bluetooth connections, and the Device Name will name appear as a con-
nection. Select and it should prompt for the 6-digit password.
Select the AWNING icon, the screen opens showing the
awnings. If there are multiple awnings, there will be a selection for each awning
at the left of the screen. Select the awning you want to control, then press and
hold the (B) or (C) buttons. Select the back arrow (A) to
return to the previous screen
Select the LEVELER icon, the screen opens showing the
leveler control panel. This screen will allow you to extend and retract the jacks
and to auto level the RV. Press the button (A) to begin leveling
the RV. Refer to the Lippert User Guide for the OneControl system for more de-
tailed information. Select the HOME icon to return to the previous screen.
Select the SLIDES icon which will open the slideout screen.
The screen can display up to (4) slideouts. Slideouts will be numbered 1-4 on the
touchscreen. Press Slide 01, and then press and hold the (A) button to ex-
tend the slide or the (B) button to retract it. Repeat this action on the remaining
slideouts. Select the back arrow to return to the Device Selection screen.
this indicates a problem with the bedroom slide-out. In
order for the slideout to function properly, the bedroom door . An elec-
tronic door catch has been installed to the wall in the bedroom behind the door. A second
piece is mounted to the door. If the door is closed, the Slide 01 notication on the touch-
screen display will disappear and the slide-out will NOT operate. When the bedroom door is
opened and the catch pieces connect, the Slide 01 notication will appear on the touchscreen
display and the slide-out can then be operated normally.
Select the LIGHTING icon and the Lighting Control screen opens
allowing you to control lighting in your RV.To operate, scroll through the list and nd the
light you want. Individual lighting controls will appear on this screen. If the switch is ON,
the light bulb for each item will illuminate. If the ALL ON switch is selected, all the lights
shown on the screen will turn ON. Selecting ALL OFF turns all the lights OFF. The lights
will light in steps to prevent a power surge.
To Next Page
Loading...
Need help?
General
