22
The upper portion of this yellow label
is federally required and indicates the total combined
weight value of occupants and cargo that may be
placed in or on your motor home as it was manufac-
tured and weighed before leaving the factory.
This label also indicates the number of safety seat
belts that have been installed at the factory. Additions
or other changes made to the motor home after it left
the factory will aect (reduce) the OCCC.
The lower portion of the label is provided voluntarily
and indicates the weight value of the motor home as
it was manufactured and weighed before leaving the
factory. This label also indicates the GCWR of the
completed motor home.
is lo-
cated on the rear bumper above the hitch receiver. Be sure to read and follow the guidelines
and information stated on this label. Refer to the Chassis Guide for additional information.
Consult a hitch specialist or your dealer for assistance when pre-
paring your motor home for towing a vehicle or trailer.
is required by
the government to verify the RV complies with all
motor vehicle standards for Canada and the United
States. It includes the following information: Man-
ufacturer name, VIN, GVWR, GAWR (front/rear),
tire and rim sizes and cold tire ination pressures.
To Next Page
Loading...
