60
Inverter
A factory installed inverter converts 12-volts
DC to useable 120-volts AC and supplies AC
power to the appliance plugged into it. It is im-
portant that you familiarize yourself with the
inverter function and operation. The inverter
should be “o” when not in use.
The inverter has a remote display panel which provide many features:
1 displays status information on the screen. It is comprised of
a display screen, LEDs, select and power buttons.
2 shows status information and error codes.
indicate the mode of operation.
Three change status information displayed on the
screen. Also, changes inverter settings.
is pressed for turning on the unit. The inverter turns on for
the loads automatically.
Solid green. Indicates grid mode in which shore power is available and
passing through to the loads.
Solid green. Indicates Battery mode (Inverter mode) in which the in-
verter is running and supplying power to the loads from the battery.
Solid red. Indicates error or fault mode and is accompanied by an error
code displayed on the LCD screen.
When you are ready to leave, reverse the power cord connection process. Use care to prevent
damaging the power cord electrical connection pins when connecting or disconnecting the
shore power cord. Grasp the plug to remove the power cord from the outlet; do not unplug
it by pulling on the cord.
Inspect the power cord for cuts, cracks and worn insulation. Have the power cord replaced
immediately if these symptoms are noticed.
To Next Page
Loading...
Need help?
General
