85
Connect to city water to supply water to RV xtures
Winterize plumbing lines and xtures
Bypass the hot water heater when winterizing to avoid damage to the water heater
Rinse the black tank to help control odors and prevent waste buildup
Rinse o items outside the unit with hot/cold faucet
Connect up to (3) coax lines with satellite, cable and auxiliary
The city water connection inlet is located in the Uni-Dock utility center.
: Receives water from water inlet on the front panel.
○ Sideways: Water goes to pump inlet.
○ Downward: Water goes into the blue handled diverter.
: Receives water from the white handle valve/water inlet on the front
panel.
○ Sideways: Water goes to or comes from the fresh water tank.
○ Downward: Water goes out to the xtures (cold).
: Receives water from the cold water supply.
○ Sideways: Water goes to hot water xtures going through hot water
heater.
○ Upwards: Water goes to hot water heater.
: Receives water from the pump.
○ Sideways: Water goes to fresh water tank.
○ Upwards: Water goes to xtures.
The following information details the functions of the utility center water valves as dis-
played on the valve operation label.
1. Connect the fresh water hose to the City water connection inlet on the utility center.
2. Set the color coded valves to POWER FILL TANK setting:
3. Connect the other end of the hose to a pressurized fresh water source (faucet or spigot).
4. Turn the pressurized water source ON, the tank should begin lling.
A check valve is located inside the city water connection inlet on the utility
center. NEVER
It will cause irreparable damage to the
valve function and the inlet will leak water.
To Next Page
Loading...
