“No file” message displayed at the
Playback mode
1. No pictures / video are stored on inserted SD/SDHC card.
2. Inserted SD/SDHC card contains records taken by “other”
recorders; your recorder may not playback these records.
Solution: Remove records taken by “other” recorders, and / or “Format”
the card. Download valuable records to the computer before formatting
the SD/SDHC card; formatting will erase all data stored on the card.
To format the SD card, connect recorder with SD card installed to
computer or insert the SD card in card reader connected to computer.
Navigate to the Start menu in the computer. Then, click on “My
Computer”. Locate your SD card drive within the root directory and
right-click on it. An option list pops out. Click on “Format” option and
further option screen is displayed. Make sure that the options are
properly selected on this screen and then click on “Start” option at the
bottom. (Note：Select ‘FAT’ option under ‘File System’ for SD card with
2GB storage capacity or below. Select ‘FAT32’ option for SD card with
4GB storage capacity or above.) The computer will start formatting the
SD card automatically. The process may take some time to complete.
DV150 – E 110719
To Previous Page
Loading...
