1
ICES statement.This class B device complies with ICES standard of Canada
Using Your Video Recorder
Power ON/OFF Button
1. Press & hold down " " to turn
recorder on.
Recorder will power off after 1 minute
of inactivity.
Mode Button
Press " " to change mode between
video record, still photo capture and
playback.
Record/Start/Stop/OK Button
1. Press " " to start video recording or
take a photo.
2. Press " " again to stop video
recording.
Down Button
Press " " to zoom out.
Playback
1. Press " " to enter playback mode.
2. In playback mode, press " " or " " (Left or
Right Button) to select another file.
3. Press " " to begin or to stop playing video,
and press " " or " " to zoom in/out photo.
4. When zoomed in press " " or " " (Left or
Right Button) to enter PAN Mode to view
image
Delete Button
1. In playback mode, press " " and
“Delete Current?” will appear on
display screen.
2. Press " " again and “Delete All?” will
appear on display screen.
3. Press " " to confirm. Press any
Battery Cover Release Button
1. Press “ ” switch to release the
battery cover, slide down the battery
cover to remove it.
2. Remove used batteries.
3. Reinstall two fresh AA batteries,
align “+”, “-” terminals as indicated.
4. Close the battery cover.
Up Button
Press " " to
zoom in.
“ ” Resolution Button
Press " " to change resolution.