7
Connecting recorder to PC; download Video/ Photos and TV Output
Please install application program from supplied installation CD before connecting recorder to PC for the first
time
1. Insert supplied CD into computer CD-ROM drive
2. Follow instruction and install programs; see more information inside "Uploading your video clips to YouTube.”
Supplied CD contains ArcSoft MediaImpression program which can be used to playback recorded video, pictures and
will provide quick access to YouTube to share your video with other Internet users.
Connect to PC
1. Press and then slide up the switch to extract USB connector. Turn the recorder ON.
2. Insert recorder’s USB connector into USB port on computer, or use supplied USB extension cable to connect.
Download Video/Photos From Recorder To PC
1. After connecting to computer, go to "My Computer” and open the "Removable
Disc" which represents your recorder.
2. Open the DCIM \ 100MEDIA folders in the Removable Disc; your recorded video
and pictures are stored in this folder. Choose the desired photo / video from the
100MEDIA folder and copy (drag with mouse) it into designated folder in your
computer, if you wish to download pictures / videos to your computer.
TV Output
1. Plug in TV cable: Insert the single-connector to recorder. Connect the end with
double-connectors to video (yellow) and to audio (red or white) input jack on TV.
2. Turn on TV and recorder.
3. Switch mode on TV to select video input (see your TV manual for instructions).
To Next Page
Loading...
Need help?
General
