11
Shooting
1. Press / hold the Power key to turn the camera ON
2. Press the Mode key once to select the Camera mode.
3. Press the Shutter key to take a still picture
NOTE: Please note that recorded video and images appear narrower on camera LCD screen
than actual recorded scene.
Changing the resolution setting of photo
1. Press OK button to open the menu.
2. Press Up or Down Direction key to select ‘Resolution’ option.
3. Press Right Direction key.
4. Press Up or Down Direction key to select the required resolution setting: VGA (640 x
480) or other option shown.
5. Press OK button to confirm the selection. Then press OK button to exit the menu.
Self Timer
There are two methods to set Self Timer mode:
Method 1: Press OK button to open the menu. Then press Up or Down Direction key to
select ‘Driver Mode’ option. Press Right Direction key and a sub-menu will appear on
LCD screen. Press Up or Down direction key to select ‘2 sec delay self timer’ or ’10 sec
To Next Page
Loading...
