5
1. Open the battery lid
2. Insert three AAA alkaline batteries according to the terminals polarity location.
3. Insert the front end of the battery lid into the battery latch, press the back end of the
battery lid and then press the lid securely closing the battery compartment.
2. Using SD Card
You must insert and use SD/MMC memory card; camera will store all recorded
images and video on the card. Max. card size is 8GB.
Note that the card has a tiny “LOCK” slider located on the side.
Set this slider to “non-LOCK” position before inserting and taking video or still images.
1. Push the SD card into the slot until it is completely inserted.
2. To remove / replace the card, lightly press inserted card and camera will eject the
card.
3. The SD card has to be formatted first: Press OK button and then press Right
Direction key to enter Setup Menu. Press Up and Down Direction key to select ‘Format’
option. Press Right Direction key and then press Up or Down Direction key to select ‘Yes’
option. The memory card will be formatted automatically.
Please note that all the previous DATA in card will be deleted when formatted.
3. Selecting Lens Mode
Slide the Macro / Normal lens selector to set either Normal (for everyday use) or Macro
mode (only for close-up) depending on the distance of the main subject.
To Next Page
Loading...
