USB PLAY
On the front panel of unit, there is a USB interface
(16), you can connect a USB driver through this in-
terface.
When you connect a USB driver through the inter-
face, the unit will search the MP3/WMA files and
start to play it automatically. In other modes, you can
also press MOD button (5) to select USB mode.
When playing the MP3/WMA files in the device, the
operation is the same with the MP3 operation de-
scribed above.
- The main unit can only support the standard USB memory.
- USB MP3 player is not a standard which means different brand
name or different models have their own standard. So our
product cannot support all MP3 players.
- When connecting an MP3 player and it has a normal battery
in the player (non-rechargeable battery), you should remove the
battery from the MP3 player then connect it to the USB inter-
face. Otherwise, it may cause battery burst.
- When in USB play mode, be sure not to remove the USB driver
from the USB interface.
CAUTION !
When there are important files in the USB device, do
not connect it to the main unit to play. Because any
wrong operation may cause file loss. And our company
assumes no responsibility for this.
CLK
Briefly press CLK button(19) to display time,Long
press CLK button(19) to enter time setting(time
setting : long press clk button, after clk flashing
then press. or knob to set time)
CLK→FOLDER→ARTIST/SONGㅇNAME→SONG
NAME→ARTIST→ALBUM
SD/MMC OPERATION
The SD/MMC interface (18) is on the housing of
the unit. When you press the release button to fold
down the front panel, you will see the SD/MMC in-
terface. When you insert a SD/MMC card in the
SD/MMC interface, the unit will search the MP3
files or WMA files in the card and start to play MP3
files or WMA files automatically. The operation is the
same with the MP3 operation described above. If in
other mode, you can also press MOD button (5) to
select SD/MMC mode. When there are important
files in the SD/MMC card, do not connect it to the
main unit to play.
ENGLISH
14
EN
USB & SD/MMC
To Next Page
Loading...