EasyManuals Logo

JB Systems MR-SU9 User Manual

JB Systems MR-SU9
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
8. Trouble-shooting
Problem Solution
No sound äCheck the power supply of the microphone and receiver.
äCheck that the transmitter and receiver are tuned to the
same frequency.
äCheck whether the hi-fi appliance is switched on and the
receiver output is connected to mixer or amplifier input.
äCheck whether transmitter is too far away from receiver or
SQUELCH control set too high.
äCheck whether receiver is located too near metal object or
there are obstructions between transmitter and receiver.
Sound interference äCheck the antenna location.
äWhen using 2 or above microphone sets simultaneously,
make sure that the chosen frequencies are not interfered.
äCheck whether the interference comes from other wireless
microphones, TV, radio and etc.
Distortion äCheck the gain control (Mic Adj.) for bodypack transmitter is
set too high or too low.
äCheck whether the interference comes from other wireless
microphones, TV, radio and etc.
WIRELESS
TROUBLE SHOOTING

Other manuals for JB Systems MR-SU9

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JB Systems MR-SU9 and is the answer not in the manual?

JB Systems MR-SU9 Specifications

General IconGeneral
BrandJB Systems
ModelMR-SU9
CategoryMicrophone system
LanguageEnglish