jbc CD Reference Guide

WARRANTY
JBC’s 2 years warranty guarantees this equipment against all ma-
nufacturing defects, covering the replacement of defective parts
and all necessary labour.
Warranty does not cover product wear due to use or mis-use.
In order for the warranty to be valid, equipment must be returned,
postage paid, to the dealer where it was purchased enclosing this
fully filled in, sheet.
MORE INFORMATION
www.jbctools.com
SERIAL Nº
STAMP OF DEALER
DATE OF PURCHASE
0010333-0211
TECHNICAL SPECIFICATIONS
- Temperature selection from 90 to 450°C (±5%).
- Power: 75W.
- Safety transformer, mains separator and double isolation, with temperature protection fuse.
- CD-2BB / CD-2SB 230V control unit. Input: 230V 50/60Hz. Output: 24V.
- CD-1BB / CD-1SB 120V control unit. Input: 120V 50/60Hz. Output: 24V.
- CD-9BB / CD-9SB 100V control unit. Input: 100V 50/60Hz. Output: 24V.
- Total weight of unit: 2,6 Kg.
- Complies with CE standards on electrical safety, electromagnetic compatibility and ESD protected housing
“skin effect”.
- RoHS compliant.
- Equipotential connector and the tool tip are connected to station mains ground supply for ESD protection.
This product should not be
thrown in the garbage.

jbc CD Specifications