3
Connectable tools: T470-A, T470-SA, T470-FA and T470-MA
Power Cord
Socket
USB Connector
to PC
ATTENTION:
We strongly recommend tigthening screw
firmly to avoid cartridge from moving
Equipotential
connector
INSTALLATION
HEAT MANAGEMENT
Work mode: Lift tool from the stand and the
tool tip heats up to the selected temperature.
Sleep mode: When the tool is in the stand, the
temperature reduces (preset sleep temperature
is 180ºC / 360ºF).
Hibernation mode: After longer periods of
inactivity (pre-set to 30 minutes), the power
is cut off and the tool cools down to room
temperature.
Heat management increase tip life which reduces cost of ownership.
JBC stations intelligently manage the tool tip temperature:
To Next Page
Loading...
