What to do if JBL Stereo System amplifier turns on, but no audio from one or more channels?
If your JBL Stereo System amplifier turns on but you're not getting audio from all channels, here's what you can do: * First, check all the input connections to ensure they are correctly and securely connected. * Next, verify the settings on your preamp, processor, or controller to make sure they are properly configured.
General| Product color | Black |
|---|---|
| Housing material | - |
| Recommended usage | Universal |
| Suitable for outdoor use | No |
| Tweeter | Yes |
| Speaker type | 2-way |
| Tweeter diameter | 25 mm |
| Speaker placement | Tabletop/bookshelf |
| Audio output channels | - channels |
| Woofer diameter (imperial) | 4 \ |
| Impedance | - Ω |
| Sensitivity | 104 dB |
| Frequency range | 45 - 35000 Hz |
| RMS rated power | 120 W |
| Signal-to-Noise Ratio (SNR) | 92 dB |
| Total Harmonic Distortion (THD) | 0.1 % |
| USB 2.0 ports quantity | 2 |
| Connectivity technology | Wired & Wireless |
| AC input voltage | 100 - 240 V |
| Power source type | AC |
| AC input frequency | 50 - 60 Hz |
Weight and Dimensions| Depth | 245 mm |
|---|---|
| Width | 590 mm |
| Height | 165 mm |
| Weight | 7400 g |
To Next Page
