What to do if JBL L75ms HDMI-ARC has no output?
If your JBL Stereo System's HDMI-ARC isn't producing any output, here are a few things you can try: * Make sure that the connected source is set to 2ch PCM. * Select the ARC input on your TV to re-establish the ARC connection. * Try selecting another source on your TV or the L75ms, and then switch back to HDMI.
Details all input/output ports and controls on the rear panel of the L75ms.
Overview of the controls located on the top surface of the L75ms.
Explains the function of each button on the included remote control.
Steps for establishing a wired or wireless network connection.
Steps to pair and connect a device via Bluetooth.
General| Type | Music System |
|---|---|
| Inputs | HDMI ARC |
| Wireless Connectivity | WiFi, Bluetooth |
| Streaming Services | Apple AirPlay 2 |
| High-Resolution Audio Support | Yes |
| Frequency Response | 45Hz - 25kHz |
| Weight | 15.9 kg |
| Amplifier Power | 350W RMS |
To Next Page
