JBL Bar 3.1 User Manual

6
2b. Select “JBL Bar 3.1” to connect
CONNECTED
Settings Bluetooth
Bluetooth
DEVICES
JBL Bar 3.1
Now Discoverable
Connected
Remark: Press and hold Bluetooth (BT) button on your remote
control for 3 seconds if you want to pair another mobile device.
NOTES
- If asked for a PIN code when connecting a Bluetooth device,
enter <0000>.
- In Bluetooth connection mode, the Bluetooth connection will
be lost if the distance between the Soundbar and the Bluetooth
device exceeds 32.8 ft/ 10m.
- The Soundbar automatically turns off after 10 minutes in the
Ready state.
- Electronic devices may cause radio interference. Devices
that generate electromagnetic waves must be kept away
from the Soundbar main unit - e.g., microwaves, wireless
LAN devices, etc.
3. To use Soundshift
By default, Soundshift is OFF, Bluetooth music cannot break in
your current source.
Press SOUNDSHIFT button on your
remote control to enable Soundshift feature.
While Soundshift
is on, play and pause your music source to enjoy
auto-switch between your mobile devices - Bluetooth source (A)
and TV - Previous source (B).
(A)
(B)
4. To use USB
Play music les located on USB storage devices through the
soundbar.
1. Connect a 2.0 USB drive to your soundbar.
2. Press repeatedly SOURCE button on the remote control
until USB is displayed on the display panel.
If USB is detected, display will show LOADING and music
start playing automatically.
Songs on your USB device is using the below logic to play music.
*Root
: Folder
:File
A
1
3
5
4
6
7
2
B
• If there is no le in the folder, the folder will not appear.
• Files are recognized by alphabetical and numerical order.
Files in root will be rst recognized, followed by les in folders.
Thus, les will be played from le
1
to le
7
one by one.
Control USB playback
Use Play/ Pause/ Previous/ Next/ Shufe to control music on your
USB device.
Mode Description Display
Off Play songs on USB
device on order
OFF
Shufe
Play songs randomly SHUFFLE
Repeat
once
Play a same song
repeatedly
ONE
Repeat all
Play all songs on USB
repeatedly by order of
the folder logic
ALL
*ROOT : The rst screen you can see when the USB is recognized is “ROOT”.

JBL Bar 3.1 Specifications

General

Audio decoders	-
RMS rated power	450 W
Audio output channels	3.1 channels
Subwoofer included	Yes
Subwoofer sensitivity	103 dB
Receiver included	No
Product color	Black
Frequency range	35 - 20000 Hz
Apple docking compatibility	Not supported
HDMI version	1.2
Bluetooth version	4.2
HDMI ports quantity	3
Connectivity technology	Wired & Wireless
Digital audio optical in	1

Weight and Dimensions

Depth	78 mm
Width	1018 mm
Height	58 mm
Soundbar weight	2300 g
Subwoofer width	305 mm
Subwoofer height	440 mm
Subwoofer weight	12100 g