JBL BAR STUDIO User Manual

6
• Depending on some devices, it may not available to recognize the
followings on this unit.
-- External HDD
-- Card readers
-- Locked devices
-- Hard type USB devices
-- USB hub
-- Using USB extension cable
-- iPhone/iPod/iPad
-- Android device
6. SOUND SETTING
This section helps you choose the ideal sound for your video or music.
Before you start
• Make the necessary connections described in the user manual.
• On the soundbar, switch to corresponding source for other devices.
Adjust the volume
• Press VOLUME +/- button to increase or decrease a volume level.
• To mute sound, press MUTE button.
• To restore the sound, press MUTE button again or press
VOLUME +/- button
Choose sound effect
1. Surround sound mode
• Experience an immersive audio experience with JBL
surround sound mode.
• Press SURROUND button to turn surround mode on or off.
LED behaviour
Surround On
LED with blink white 2 times, then keep
constant white for 5 seconds
Surround Off LED with blink white 2 times
• On: Create a surround listening experience.
• Off: Two-channel stereo sound. Ideal for listening to music.
2. Bass
• Press BASS +/- to change the bass level.
3. Sound mode
• Select predened sound modes to suit your video or music.
• Press SOUND MODE button to select a sound option.
• Select the STANDARD mode if you want to enjoy the original
sound.
• Select the MOVIE, MUSIC, VOICE, SPORT mode depending
on the content you want to listen to.
Standard
Movie
Music
Voice Sport
4. Night mode
• For quiet listening, night mode decreases the volume of
loud sounds when audio is played.
• Night mode is only available for Dolby Digital soundtracks.
• Press NIGHT MODE button to turn night mode on or off.
LED behaviour
Night mode On
LED with blink white 2 times, then keep
constant white for 5 seconds
Night mode Off LED with blink white 2 times
5. Audio feedback
Audio feedback enables audible tones indicate certain product
features. When Audio feedback is ON, you will hear tones for
specic actions on the JBL Bar Studio:
• Enter Bluetooth pairing
• Bluetooth device is connected
• Reach maximum volume
• Surround mode On/Off
LED behaviour
Audio feedback
On
LED with blink white 2 times, then keep
constant white for 5 seconds
Audio feedback
Off
LED with blink white 2 times
Press and hold 5 seconds SOUND button to reset default
audio setting.
7. RESPOND TO YOUR TV
REMOTE CONTROL
Use your own TV remote control to control your soundbar
7a. For most Samsung, LG, Sony and Vizio TVs*
The soundbar responds to your TV remote control automatically.
Controllable functions are volume up/down and mute. Press and
hold SHUFFLE button on soundbar remote control if you want to
disable this function.

JBL BAR STUDIO Specifications

General

Audio decoders	-
RMS rated power	30 W
Audio output channels	- channels
Surround modes quantity	1
Number of woofer drivers	2
Woofer diameter (imperial)	2 \
Signal-to-Noise Ratio (SNR)	90 dB
Tweeter diameter (imperial)	1.5 \
Subwoofer included	No
Bluetooth	Yes
HDMI version	1.4
Bluetooth version	4.2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Product color	Black
Cables included	AUX, Optical

Weight and Dimensions

Depth	86 mm
Width	614 mm
Height	58 mm
Soundbar weight	1400 g