Do you have a question about the JBL CS1500 and is the answer not in the manual?
maximum recommended amplifier power | 150 Watts |
---|---|
power handling | 50W Continuous/300W Peak |
frequency response | 55Hz – 30kHz (–6dB) |
---|---|
nominal impedance | 8 Ohms |
sensitivity | 90dB @ 1 Watt/1 meter |
dimensions | 1168 x 286 x 286mm (46" x 11-1/4" x 11-1/4") |
---|---|
weight | 7.7kg (17 lb) |
tweeter | One 3/4" (19mm) titanium-laminate dome, video-shielded |
maximum recommended amplifier power | 125 Watts |
---|---|
power handling | 40W continuous/300W peak |
frequency response | 60Hz – 30kHz (–6dB) |
---|---|
nominal impedance | 8 Ohms |
sensitivity | 88dB @ 1 watt/1 meter |
dimensions with base and grille | 363 x 155 x 116mm (14-5/16" x 6-1/8" x 4-9/16") |
---|---|
weight with base and grille | 2.3kg (5 lb) |
dimensions without base | 338 x 155 x 130mm (13-5/16" x 6-1/8" x 5-1/8") |
maximum recommended amplifier power | 150 Watts |
---|---|
power handling | 50W Continuous/300W Peak |
frequency response | 55Hz – 30kHz (–6dB) |
---|---|
nominal impedance | 8 Ohms |
sensitivity | 90dB @ 1 watt/1 meter |
dimensions | 159 x 667 x 108mm (6-1/4" x 26-1/4" x 4-1/4") |
---|---|
weight | 4.5kg (10 lb) |
tweeter | One 19mm (3/4") titanium-laminate dome, video-shielded |
amplifier power | 150 Watts RMS |
---|
frequency response | 27Hz – Low-pass crossover setting at signal source |
---|---|
low-frequency driver | 250mm (10") cone and HeatScape™ motor structure, video-shielded |
dimensions | 464 x 337 x 406mm (18-1/4" x 13-1/4" x 16") |
---|---|
weight | 19.5kg (43 lb) |
Instructions for reading, keeping, following, cleaning, ventilation, and placement.
Covers polarized plugs, power cords, openings, and electrical safety.
Precautions for lightning, heat, water, and antenna grounding.
Guidelines for qualified service, parts, and safety checks.
Overview of included speaker models: CST55, CSB5, CSC55, CSS10.
Optimal positioning for front, center, and surround speakers.
Tips for placing the subwoofer for maximum bass performance.
Step-by-step guide for wall-mounting CSC55 and CSB5 speakers.
How to strip speaker wire and ensure correct polarity for connections.
Instructions for connecting wires to CST55 base and CSB5/CSC55 terminals.
Connecting for Dolby Digital, DTS, and other digital modes.
Connecting for Dolby Pro Logic and analog surround modes.
How the subwoofer powers on, enters standby, and auto-turns off.
Using volume and phase controls for optimal bass response.
Resolving issues with no sound from speakers or specific channels.
Troubleshooting low bass output and center channel sound issues.
Addressing problems with surround sound, system setup, and media playback.
Detailed specs for CST55, CSB5, CSC55 speakers and CSS10 subwoofer.
Information on CE compliance, Dolby, DTS, and JBL trademarks.