JBL CS 360 Xcite User Manual

Owner’s manual
Thank you for choosing JBL. For over 60 years, JBL
has been involved in every aspect of music and film recording and
reproduction, from live performances to monitoring the recordings you
play in your home, car or office.
We’re confident that the JBL system you have chosen will provide
every note of enjoyment that you expected – and that when you
think about purchasing additional audio equipment for your home,
car or office, you will once again choose JBL.
JBL Consumer Products

JBL CS 360 Xcite Specifications

General

Subwoofer Frequency Response	40Hz - 150Hz
Satellite Speaker Impedance	4 Ohms
Subwoofer Impedance	4 Ohms
Remote Control	Yes
Input Options	RCA
Dimensions (Satellite Speakers)	96 x 96 x 96 mm
Weight (Subwoofer)	4.6 kg

Summary

Important Note

Automatic On/Off and Input Selector Functions

Explains how automatic turn-on/off and input selection features work.

Included Components and Features

System Features Overview

Details the capabilities like DTS, Dolby Digital, SRS TruSurround HD, etc.

Speaker Placement Guide

Front Channel Placement

Guidance on positioning left, right, and center satellite speakers.

Subwoofer Placement Advice

Advice on positioning the subwoofer for optimal bass performance.

Wall-Mounting Instructions

Fixed-Mount Wall Bracket

Steps and notes for installing the fixed-mount wall bracket.

Adjustable Wall Bracket Installation

Detailed instructions for mounting speakers using the adjustable bracket.

Speaker Connections

Satellite and Center Channel Wiring

Details on connecting satellites and center channel speakers, observing polarity.

Rear Panel Connections

Speaker Outputs

Connects the three main speakers to the subwoofer.

Audio and Digital Inputs

Connects analog and digital audio sources to the system.

Power and Control Ports

Includes IR input, factory data, power switch, and fuse.

Controls and Indicators

Front Panel Operation

Explains the ON button, Input selection, and Information Display.

Remote Control Functions

Details input selection, power, menu navigation, and sound modes.

Audio Adjustment Controls

Controls for Bass, Tone, Volume, Mute, and Surround modes.

System Navigation and Special Functions

Includes Navigation, Exit, Light, AUX, and Infrared Sensor.

Setup Procedure

TEST Function

Adjusts speaker output levels using a pink noise test signal.

LEVELS Adjustment

Adjusts individual speaker levels while listening to program material.

UNITS Selection

Selects meters or feet for speaker distance settings.

DISTNC (Distance) Adjustment

Adds delay to speakers to adjust perceived distance.

LIPSNC (Lip Sync) Adjustment

Delays audio to sync with video, adjusting for processing delays.

DISPLY (Display) Options

Configures display behavior, including timeout settings.

ON VOL (On Volume) Setting

Sets the system's startup volume level.

NAME Input Naming

Allows assigning custom names (up to six characters) to inputs.

AU ON (Auto Turn On) Setting

Activates or deactivates the automatic system turn-on feature.

AU SRC (Auto Source) Setting

Activates or deactivates automatic source selection.

RESET? Function

Resets all setup settings to factory defaults.

Surround Sound Modes

Phantom Mode

Creates surround sound from stereo, center channel not used.

3-Stereo Mode

Plays Pro Logic-encoded films without surround channels.

Stereo Mode

Plays recordings in traditional two-channel stereo.

Troubleshooting Common Issues

No Sound From Speakers

Checks power, source, and connections for sound issues.

No Sound From Center Speaker

Verifies surround mode, center level, and connections.

Low Bass Output

Advice on subwoofer placement and increasing bass levels.

System Specifications

Power Output and Drivers

Details power output for satellites, center, and subwoofer, plus driver specs.

Dimensions and Weight

Provides physical dimensions and weight for satellites, center, and subwoofer.