What to do if there is no sound from my JBL DSC 1000 receiver/amp?
- MMary HardyJul 30, 2025
If you're not getting any sound from your JBL Speaker System's receiver or amplifier, there are a few things to check: * First, ensure that the receiver is properly plugged in and that the power switch is in the ON position. * Next, inspect the wires and connections between the receiver and the speakers to make sure they are not frayed or damaged. * Also, verify that the receiver is set to Dolby Digital or DTS mode. * Finally, confirm that the correct source is selected on both the receiver/amplifier and the powered speakers.