ACOUSTIC & ELECTRICAL SPECIFICATIONS:
• Nominal Impedance 8 Ohms
• Max Amp Power 400 Watts*
• Frequency Response 45Hz – 50kHz (–6dB)
• Sensitivity 94dB (2.83V @ 1 meter)
• Crossover Frequencies 800Hz, 10kHz
SYSTEM COMPONENTS:
• Cabinet K2 S9800/K2 S9800SE
(not for sale)
• Grille 337854-001
• Ultrahigh-Frequency 1" (25.4mm) 045Be
Transducer beryllium (336318-001)
DC Resistance 3.1 Ohms, ±3%
• High-Frequency Transducer 3" (76.2mm) 435Be
beryllium (337361-001)
DC Resistance 3.6 Ohms, ±10%
• Low-Frequency Transducer 15" (381mm) 1500AL
alnico (336308-001)
DC Resistance 5.3 Ohms, ±10%
• Crossover Network 337978-001 (K2 S9800)
352043-001 (K2 S9800SE)
AURAL SWEEP TEST SPECIFICATIONS:
• System Aural Sweep Test 6.0V Input 40Hz to 50kHz
• L.F. Aural Sweep Test 20.0V Input 20Hz to 600Hz
• H.F. Aural Sweep Test 2.0V Input 500Hz to 10kHz
• U.H.F. Aural Sweep Test 1.00V Input 7kHz to 50kHz
PHYSICAL SPECIFICATIONS:
• Enclosure Dimensions 51" x 20" x 14-3/4"
(H x W x D) Plus spiked feet
(1295mm x 508mm x 375mm)
• Weight 198 lb/90kg (each)
WARRANTY:
•Refer to Warranty Statement packed with each product.
* The maximum recommended amplifier power rating will ensure
proper system headroom to allow for occasional peaks. We do not
recommend sustained operation at these maximum power levels.
PACKAGING
44
45
43
46
47
42
Legend on Pages 5-6
K2 S9800/K2 S9800SE WIRING DIAGRAM
Crossover Network
337978-001 (K2 S9800)
352043-001 (K2 S9800SE)
UHF
336318-001
+
+
GRN
GRN/BLK
YEL
YEL/BLK
ORN
ORN/BLK
HF
337361-001
LF
336308-001
BLK
RED
K2 S9800/K2 S9800SE
Rev 1 5/07
Harman Consumer Group, Inc., 250 Crossways Park Drive, Woodbury, New York 11797
Technical Manual
K2 S9800/K2 S9800SE
To Next Page
Need help?
General
