11
English
System format: Two-way floor-standing or soffit mountable
High-frequency transducer: D2430K dual-diaphragm dual voice-coil compression driver
Nominal impedance: 20 ohms
Low-frequency transducer: 2216Nd 15” (381mm) Differential Drive
®
cone driver
Nominal impedance: 6 ohms
Crossover frequency: 800Hz (supplied by outboard Digital Signal processing)
Frequency range: 20Hz – 40kHz
Image Control waveguide dispersion: 120° H x 100° V
Sensitivity (1W/1m): 92dB SPL
Continuous/peak SPL@ 1m: 117dB/129dB
System requirements: One Crown I-Tech 5000HD amplifier per speaker or one Crown
I-Tech 4X3500HD amplifier per two speakers or BSS Soundweb
London BLU-800, BLU-160 or BLU-80 processor with a Crown
Macro-Tech
®
5000i or other suitable amplifier
Recommended amplifier power: 1200 Watts per channel into 8 ohms
Input connectors: Individual spring terminals for low-frequency and high-frequency
Enclosure construction: 25mm (1”) MDF
Finish: Satin black lacquer
Included: Removable ABS grille with black UL-compliant fabric;
4 steel floor spikes
Dimensions (W x H x D): 508mm x 1256mm x 356mm (20” x 49-1/2” x 14”)
Weight: 58.5kg (129 lb)
SPECIFICATIONS
To Next Page
Loading...
