JBL MA7100HP - Page 27

MA7100HP | MA9100HP Owner's Manual | rev1.3 20240612
Pg 27 of 45
©2024 Harman International | Features, Specifications, and Appearance subject to change without notice.
LED Underglow – Use the settings in this menu to customize the style of your Receiver by adjusting the LED underglow.
󰄣 Status – Adjust when the LED underglow is active: Boot Up / Always On / Always Off
󰄣 Color – Customize the color of the LED underglow. Available colors include:
JBL Orange | Yellow | Green | Blue | Purple | Red
󰄣 Dim - This setting controls the brightness of the LED underglow: Bright / Normal / Dim / Off
Assign Video In - Settings to optionally assign a video source to each of the normally audio-only inputs. These settings are
stored in memory and recalled each time the unit is powered up.
The default for each of the audio-only inputs is ‘None’. You could, however, associate HDMI video with NET internet radio audio
to receive radio commentary of a sports game with pictures from cable coverage, for example.