MA7100HP | MA9100HP Owner's Manual | rev1.3 20240612
Pg 32 of 45
©2024 Harman International | Features, Specifications, and Appearance subject to change without notice.
CALIBRATING THE SYSTEM WITH EZ SET EQ
The EZ Set EQ app will automatically try to establish a connection with the AVR.
Connectivity between the mobile device and the JBL MA Series AV Receiver models are as follows:
If the auto-connect fails, confirm that the mobile device and the AVR are connected to the same network. Check that the IP
address of the AVR is on the same subnet in network settings. You can confirm this by navigating to Menu > Setup > Network
Status > Status. Network should be selected as the input source.
To Next Page
Loading...
