MA7100HP | MA9100HP Owner's Manual | rev1.3 20240612
Pg 39 of 45
©2024 Harman International | Features, Specifications, and Appearance subject to change without notice.
Dirac Live (cont’d) - Tips
We advise you to look over the reported measurements on the screen following Dirac Live setup for any obviously incorrect
results, to ensure the reported speakers match your configuration and that the speaker distances to the listening position
appear look roughly correct. If the results are not what you expected re-run Dirac Live setup.
The Dirac Live setup function is normally quite accurate but occasionally false results can be generated. Problems may be
because of:
• external sounds or rumbling/handling noises picked up by the microphone.
• sound reflections off hard surfaces (e.g. windows or walls) close to the listening position.
• very strong acoustic resonances within the room
• obstacles (such as a sofa) between speakers and the microphone.
If you are still experiencing difficulties or wish to have the most accurate results for ultimate surround performance, we
recommend using the manual method of establishing speaker distances and levels.
Using subwoofers
If your system includes active subwoofers you may need to set the subwoofer output level/gain control set to a higher or lower
value.
Please refer to the Dirac application and quick start guide for full details of how to use the system with your Receiver.
Downloading the Dirac Live application
To download the Dirac Live PC/MAC application and quick start guide, please visit:
live.dirac.com
To Next Page
Loading...
