troubleshooting
your
JBL
On
Stage
IIIP
I
Technical Specifications
Frequency Response:
70Hz
-
20kHz
Power Consumption:
20W Maximum
Power Input:
12V/1·5
A
J
BL
On Stage IIIPTransducer:
(4)
1"
Full range per channel
Dimensions:
Diameter - 7 1/2"
(lgomm)
Height -
2"
(Slmm)
System Weight:
1.12
Ib
(0.51
kg)
Battery:
Size
- AA
Type
- Alkaline,
NiMh
DO
NOT
MIX
BATTERY
TYPES.
DO
NOT
MIX CHARGED
AND
PARTIALLY CHARGED
BATTERIES.
BATTERIES
WILL
NOT
RECHARGE
WHILE IN
JBL
ON
STAGE
IIiP.
No
sound from the
JBL
On Stage IIIP speaker
system.
No
power to the system.
Power adapter plug is
not
inserted correctly.
No volume
or
low volume.
Input
source volume
is
low.
Low
or
drained batteries.
iPod is paused.
Ensure that the power supply is connected to a live
power source and properly connected
to
the J
BL
On Stage IIIP. Note: When the
JBL
On Stage IIiP
is
powered, a green power
LED
on the
JBL
On Stage IIIP
should light up.
Touch the volume
"Up"
(+)
pad on the volume control
to
unmute
and/or
increase the system volume level.
Note: Touching the volume
"Down"
(-)
pad lowers
the system volume. Touching both the
(+)
and
(-)
volume control pads at the same time will mute the
system.
Increase the volume level on the audio source device.
Replace the batteries.
Press
the
Play
button on the iPod
or
remote control.
If
you have any questions
or
need
further assistance, please visit www.jbl.com.
Features, specifications and appearance
are
subject
to
change
without
notice.
7
To Next Page
Loading...
Need help?
General
