JBL OnBeat Venue LT - User Manual

To Next Page

Quick Setup Guide

JBL OnBeat

™

VenUe Lt

WeLcOme

Thank you for purchasing the JBL OnBeat

™

Venue LT speaker dock. This quick setup

guide will show you how to connect and set up your dock.

cOnnectIOnS

1. If you are going to use your OnBeat Venue LT with another audio source, plug one end of

a 3.5mm (1/8") stereo cable (not supplied) into the OnBeat Venue LT’s Aux In connector,

and plug the other end into the audio source’s audio out or headphone out connector.

2. Plug the OnBeat Venue LT’s power supply into the Power connector on the unit and into

a working AC power outlet. The OnBeat Venue LT will automatically turn on and go into

the Bluetooth pairing mode (the Bluetooth LED will be flashing blue).

Power

Connector

Aux

Input

Need help?

Do you have a question about the JBL OnBeat Venue LT and is the answer not in the manual?

Summary

Welcome

Connections Guide

Connecting External Audio Sources

Connects external audio sources via a 3.5mm stereo cable to the Aux In connector.

Powering the Device

Connects the speaker dock to an AC power outlet and initiates Bluetooth pairing.

Placement and Controls

Optimal Placement

Ensures proper operation of bass ports by maintaining distance from walls.

Controls and Indicators Overview

Details on Bass Boost, Movie, Source, Power buttons, and indicator LEDs for various functions.

Bluetooth Wireless Streaming

Pairing and Streaming Audio

Steps to pair a Bluetooth device and stream audio wirelessly to the speaker dock.