To Next PageTo Next Page
Need help?Do you have a question about the JBL S2-1024 and is the answer not in the manual?
General| Impedance | 4 Ω |
|---|---|
| Rated power | 250 W |
| Sensitivity | 92 dB |
| Speaker type | - |
| Frequency range | 30 - 175 Hz |
| Shape | Round |
| Amplifier included | No |
Weight and Dimensions| Diameter | 250 mm |
|---|---|
| Mounting depth | 142 mm |
Introduction to JBL Series II subwoofers, thanking the user and recommending professional installation.
Explains how vehicle cabin gain affects bass frequencies below 80Hz, influencing subwoofer response.
Discusses optimal enclosure types: sealed, vented, and band-pass, considering space and power.
Details advantages like flat response and trade-offs like lower efficiency for sealed enclosures.
Covers benefits like higher output and trade-offs like reduced low-octave output for vented enclosures.
Provides guidance on mounting the subwoofer and connecting it, including impedance settings.
Explains the Selectable Smart Impedance (SSI) switch for 2-ohm or 4-ohm operation.
Detailed Thiele-Small parameters for S2-1024 and S2-1224 models at 2-ohm and 4-ohm.
Diagrams and volumes for sealed and vented enclosures for both subwoofer models.
Key specifications including diameter, sensitivity, power handling, and frequency response.
Instructions for connecting the amplifier, including warnings about the SSI switch.
