JBL SDP-5 - Page 129

MODE ADJUST
JBL Synthesis
5-26
dts(-ES)
• Designed for playback of 5.1- and 6.1-channel dts(-ES) sources.
• Decodes 5.1 matrix or 6.1 discrete channels from dts(-ES)
sources. The six main channels are full-frequency. The .1
channel, often referred to as LFE information, has a limited
frequency range of 120Hz.
• Appropriate for dts(-ES) film sources.
Option/ Default Possible
Parameter Setting Settings
LFE MIX +0.0dB -10.0 to +0.0dB
ES DECODING AUTO AUTO, ON, OFF
OUTPUT LEVELS
CUSTOM
Listening mode menu option and parameter descriptions begin on page 5-28.
dts(-ES) 2-CHAN
• Designed for converting 5.1- or 6.1-channel dts(-ES) sources
into 2-channel LOGIC7-encoded output signals.
• Sends downmixed 5.1- or 6.1-channel dts(-ES) input signals to
the front speakers and subwoofer.
• Recommended for recording purposes.
Option/ Default Possible
Parameter Setting Settings
CENTER MIX +0dB -25 to +5dB
SURROUND MIX +0dB -5 to +5dB
CNTR DLY SAMPLES +0 -127 to +127
MASTER LEVEL +0dB -5 to +5dB
LFE MIX +0.0dB -20.0 to +0.0dB
ES DECODING AUTO AUTO, ON, OFF
SUB LEVEL +0dB OFF, -30 to +12dB
CUSTOM
Listening mode menu option and parameter descriptions begin on page 5-28.
MODE ADJUST dts-ES 2-CHAN

MODE ADJUST dts-ES
