JBL SRX700 Series - SRX722 Specifications; SRX725 Specifications

5
SRX722 - Dual 12¨, two-way, bass-reflex (suspendable version, SRX722F)
SRX725 - Dual 15¨, two-way, bass-reflex (suspendable version, SRX725F)
Frequency Range (-10 dB): 72 Hz - 20 kHz
Frequency Response (±3 dB): 81 Hz - 20 kHz
Coverage Pattern: 75º x 50º nominal
Crossover Modes: Bi-amp / passive, externally switchable
Crossover Frequency: 1.2 kHz
Power Rating (Continuous¹/Program/Peak): Passive: 1200 W / 2400 W / 4800 W
Bi-amp LF: 1200 W / 2400 W / 4800 W
Bi-amp HF: 75 W / 150 W / 300 W
Maximum SPL²: 135 dB SPL peak
System Sensitivity (1w @ 1m): 97 dB SPL (passive mode)
LF Driver: 2 x JBL 2262H 305 mm (12 in) Differential Drive® woofer with neodymium-magnet and dual voice-coils
HF Driver: 1 x JBL 2451H 102 mm (4 in) voice-coil, neodymium-magnet compression driver
Nominal Impedance: Passive: 4 ohms
Bi-amp LF: 4 ohms
Bi-amp HF: 8 ohms
Active Tunings: dbx DriveRack, all models.Settings available at www.jblpro.com
Enclosure: Trapezoidal, 15 mm, 11-ply birch plywood
Suspension / Mounting: 5 x suspension points, M10 or optional track kit (F version only)
Transport: 2 x steel handles
Finish: Black DuraFlex™ finish
Grille: Powder coated, black, 16-gauge perforated steel with acoustically transparent charcoal foam backing
Input Connectors: Neutrik ® Speakon® NL-4 (x2)
Dimensions (H x W x D): 965 mm x 394 mm x 394 mm (38.0 in x 15.5 in x 15.5 in)
Net Weight: 34 kg (76 lb)
Optional Accessories: SRX722-CVR: Pull-over padded cover
SRX-FF3: Flying hardware kit (for use with F versions only)
229-00009-01: Suspension kit, includes 3 x 10 mm forged eyebolts & washers (for use with F versions only)
Frequency Range (-10 dB): 37 Hz - 20 kHz
Frequency Response (±3 dB): 53 Hz - 20 kHz
Coverage Pattern: 75º x 50º nominal
Crossover Modes: Bi-amp / passive, externally switchable
Crossover Frequency: 1.2 kHz
Power Rating (Continuous¹/Program/Peak): Passive: 1200 W / 2400 W / 4800 W
Bi-amp LF: 1200 W / 2400 W / 4800 W
Bi-amp HF: 75 W / 150 W / 300 W
Maximum SPL²: 136 dB SPL peak
System Sensitivity (1w @ 1m): 99 dB SPL (passive mode)
LF Driver: 2 x JBL 2265H 380 mm (15 in) Differential Drive® woofer with neodymium-magnet and dual voice-coils
HF Driver: 1 x JBL 2451H 102 mm (4 in) voice-coil, neodymium-magnet compression driver
Nominal Impedance: Passive: 4 ohms
Bi-amp LF: 4 ohms
Bi-amp HF: 8 ohms
Active Tunings: dbx DriveRack, all models. Settings available at www.jblpro.com
Enclosure: Trapezoidal, 15 mm, 11-ply birch plywood
Suspension / Mounting: 5 x suspension points, M10 or optional track kit (F version only)
Transport: 2 x steel handles
Finish: Black DuraFlex™ finish
Grille: Powder coated, black, 16 gauge perforated steel with acoustically transparent charcoal foam backing
Input Connectors: Neutrik ® Speakon® NL-4 (x2)
Dimensions (H x W x D): 1219 mm x 541 mm x 508 mm (48 in x 21.3 in x 20 in)
Net Weight: 45 kg (100 lb)
Optional Accessories: SRX725-CVR: Pull-over padded cover
SRX-FF3: Flying hardware kit (for use with F versions only)
229-00009-01: Suspension kit, includes 3 x 10 mm forged eyebolts & washers (for use with F versions only)
¹ IEC filtered noise with 6 dB crest factor.
² Calculated based on power rating and sensitivity, 1 m.