Need help?Do you have a question about the JBL Synthesis S800 and is the answer not in the manual?
General| Type | Power Amplifier |
|---|---|
| Channels | 2 |
| Input Impedance | 20k Ohms |
| Input Sensitivity | 1.4V |
| Frequency Response | 20Hz - 20kHz |
| Signal-to-Noise Ratio | >100dB |
Essential safety instructions for operating audio equipment to prevent hazards.
Welcome to the JBL Synthesis S800 power amplifier, highlighting its audio performance.
Summarizes THX Ultra specs, multi-channel use, high power, auto turn-on, quiet cooling, and protection.
Details front and rear panel controls, indicators, and operational modes for the S800 amplifier.
Provides an overview of connecting the S800 within JBL Synthesis systems.
Illustrates the recommended rack layout for a Synthesis One system configuration.
Shows how control signals are routed in a Synthesis One system.
Depicts the signal flow and cable connections for a Synthesis One system.
Shows the recommended rack layout for a Synthesis Two or Three system.
Illustrates control signal routing for Synthesis Two & Three systems.
Details signal flow and cable connections for Synthesis Two & Three systems.
To Next Page
